近日，寧波市沃特測試技術服務有限公司（以下簡稱“寧波沃特”）獲得由IECEE（國際電工委員會電工設備及零部件合格評定體系）頒發的CB Testing Laboratory（以下簡稱“CBTL”）證書。

Recently, Waltek Testing Group (Ningbo) Co., Ltd. (hereinafter referred to as " WALTEK Ningbo") has obtained the CB Testing Laboratory (hereinafter referred to as "CBTL") certificate issued by IECEE.

寧波沃特是繼佛山市沃特測試技術服務有限公司、深圳沃特檢驗集團有限公司東莞分公司之后，沃特檢驗集團旗下第三家獲得CBTL資質的實驗室，標志著沃特檢驗集團進一步強化自身管理及測試實力，在協助客戶開拓國際市場的方面中又跨出了堅實的一步。

WALTEK Ningbo is the third laboratory of Waltek Testing Group which has obtained CBTL certificate after WALTEK Foshan and WALTEK Dongguan, it is a key mile stone  for Waltek Testing Group, that marks WALTEK made its management system and testing capabilities more strengthened, it is another solid step in assisting customers to access international markets.

全面嚴謹的審核

Comprehensive and rigorous audit

沃特檢驗集團（WALTEK Testing Group）作為國內TIC行業的佼佼者，深耕產品檢測近二十年，在全球疫情肆虐、外部環境劇烈變化的情況下，再度發力，提交了旗下寧波公司關于家用電器及照明電器類產品的CBTL資質申請，戰略合作伙伴德凱（DEKRA，德國最大的權威檢測機構）作為NCB機構（National Certification Body），對此給予了全面支持。

As one of the leading players in Chinese TIC (Testing, Inspection, Certification) industry, WALTEK Testing Group has been deeply engaged in consumer product testing for nearly 20 years. When facing global pandemic and global economic, political uncertainty, WALTEK Testing Group exerted its efforts once again and submitted CBTL qualification application for Ningbo lab on electrical household appliances, lighting products, the strategic partner DEKRA (DEKRA, the largest authoritative testing organization in Germany), as the NCB organization (National Certification Body), has given us full support.

5月下旬，由國際IECEE審核組一行對寧波沃特進行了持續三天審核，全面審計了實驗室的環境設施、人員能力、質量管理體系等要素。最后，評審組一致認為寧波沃特實驗室完全符合ISO/IEC 17025:2017及IECEE的相關規則和文件要求。

In late May, the international IECEE assessment team conducted a three-days audit on WALTEK Ningbo, and comprehensively audited the laboratory's environmental facilities, test equipment, personnel capabilities, quality management system, etc. Finally, the assessment result showed that WALTEK Ningbo fully complies with relevant rules, procedures and requirements of ISO/IEC 17025:2017 and IECEE ODs.

寧波沃特獲得CBTL資質，不僅代表了IECEE與NCB對寧波沃特實驗室管理及運營能力的認可，更代表著沃特檢驗集團有能力為區域客戶提供更加便捷的CB及相關的全球檢測、認證服務。

WALTEK Ningbo 's CBTL qualification not only represents IECEE and NCB's recognition of Ningbo Waltek's laboratory management and operation capabilities, but also represents the ability of WaltekTesting Group to provide more convenient CB and related global testing and certification service for regional customers.

一次測試，全球認可

One test, global recognition

IECEE CB Scheme是一套基于IEC標準的電工產品的全球互認體系。它是參與國和認證組織之間的多邊協議，旨在通過促進國家標準與國際標準的協調以及全球公認的國家認證機構 (NCB) 之間的合作來促進貿易。 通過實現這一點，它使產品制造商更接近“一種產品，一次測試，一次通行”的理想概念。

The IECEE CB Scheme is an international system for mutual acceptance of test reports and certificates dealing with the safety of electrical and electronic components, equipment and products.based on IEC standards. It is a multilateral agreement among participating countries and certification organizations, which aims to facilitate trade by promoting harmonization of national standards with International Standards and cooperation among accepted National Certification Bodies (NCBs) worldwide. By achieving this, it brings product manufacturers a step closer to the ideal concept of "one product, one test, one mark, where applicable".

目前，已有50多個成員國家（Member Body）、90多個認證機構（National Certification Body）之間形成互認協議。

At present, more than 50 member countries (Member Body) and more than 90 certification bodies (National Certification Body) have formed mutual recognition agreements.

制造商可憑借一個NCB頒發的CB報告和證書獲得IECEE各成員國的認可，進行補充測試或國家差異測試后，即可便捷轉證。

Manufacturers can obtain the recognition of IECEE member states with a CB report and certificate issued by an NCB, and can easily transfer certification after conducting supplementary testing or national difference testing.

效率更高，成本更優

Higher efficiency and better cost

寧波沃特 CBTL獲得了3大領域（HOUS家用及類似用途設備, LITE照明設備, MISC雜項類）超過70項標準的能力認可，詳見IECEE網站: 

https://www.iecee.org/dyn/www/f?p=106:25:0::::FSP_ORG_ID:28238

Waltek Ningbo CBTL has obtained the ability which covers more than 70 standards in 3 major product category (HOUS, LITE, MISC). For details, see the IECEE website:

https://www.iecee.org/dyn/www/f?p=106:25:0::::FSP_ORG_ID:28238

成為CBTL后，寧波沃特可直接對樣品進行本地化測試，測試通過后即可通過NCB發證，有效縮短項目的測試周期；基于CB實驗室快速的測試以及NCB良好的國際認可度，可真正實現一站式的國際認證服務，免去了重復測試帶來的不便，全面提升認證效率。

After becoming a CBTL, WALTEK Ningbo can directly conduct localized testing. After testing and certification review, it can be certified by NCB directly, effectively shortening the service time from testing to certification; based on the rapid testing of CB laboratory and the good international recognition of NCB, it can truly realize one-stop international certification services, eliminate the inconvenience caused by repeated testing due to national/regional difference, and improve certification efficiency.

未來，沃特檢驗集團將持續充分發揮旗下各分子公司的地域優勢，為信賴并選擇我們的客戶在激烈的國際市場競爭中提供更強有力的技術支持和優質服務，為實現利益相關方的共創共贏付出不懈努力。

In the future, WALTEK Testing Group will continue to give full play to the geographical advantages of its subsidiaries, provide stronger technical support and high-quality services for customers who trust and choose us in the fierce international market competition, and achieve mutual benefits among stakeholders. Make unremitting efforts to create a win-win situation.