新加坡PSB認證標志大改革
2018-4-2, 原新加坡認證監管機構SPRING Singapore經過與新加坡國際企業發展局 International Enterprise (IE) Singapore重組合并后更名為Enterprise Singapore。
其原官網也由https://www.spring.gov.sg/ 更新為 https://www.enterprisesg.gov.sg/
標志變動主要有兩方面：
1. 底色由原來的藍色改為紅色（印刷時可以根據實際需求印刷成黑白）；
2. “SAFETY MARK” 字體微調（見下圖）
原來要求的顏色：
現在要求的顏色：
對于標志尺寸要求如下：
1）SAFETY Mark without Contrasting Background(e.g.embossed on body of Controlled Goods)
The safety logo ,letters and certification number shall be of raised or lowered depth of not less than 0.51mm.
The SAFETY Mark(consisting of both the safety logo and the word”SAFETY MARK”)shall have a height of not less than 9.5 mm.The certification number shall have a height of not less than 2.8 mm.
Any SAFETY Mark with dimension smaller than the above has to be approved by the Safety Authority.
2) SAFETY Mark with Contrasting Background（e.g.silk screened on body of Controlled Goods or printed on rating labels or carton boxes or as standalone adhesive labels）
The SAFETY Mark（consisting of both the safety logo and the word”SAFETY MARK”）Shall have a height of not less than 6.0 mm. The certification number shall have a height of not less than 1.6 mm.
Any SAFETY Mark with dimension smaller than the above has to be approved by the Safety Authority.
3)Points for adherence
a)The SAFETY Mark shall be fully reproduced with the safety logo enclosed in a square on the left, the word”SAFETY MARK”enclosed in a rectangle on the right and the certification number traceable to the registrant across the bottom.
b)The SAFETY Mark can be embossed or silk screened on any coloured material or printed with the same colour used for rating labels or carton box markings.When printed as standalone adhesive labels, the colour of the safety logo, the background for the word”SAFETY MARK”and the certification number is Pantone 032C.
同時，Enterprise Singapore于4月6日發布文件宣布從2018.4.1 開始實施新的PSB 標志。自2018-4-2 起，新發證的PSB證書對應產品上新加坡logo需使用最新標志。
B. Registration and Usage of Updated SAFETY Mark
The SAFETY Mark has been updated in view of the formation of Enterprise Singapore.Refer to Annex A of this circular for the new SAFETY Mark Bromide, and Annex B for the guidelines on usage of the SAFETY Mark on Registered Controlled Goods.
Registered Suppliers must note the following on utilization of the updated SAFETY Mark:
1、For any registration of Controlled Goods after 2 April 2018:
Registered Suppliers who submit new or renewal registrations of Controlled Goods after 2 April 2018 are to affix the Controlled Goods with the updated SAFETY Mark（refer to Annex A）,after it is successfully registered, and before being supplied in Singapore.
After 2 April 2019, Enterprise Singapore will not accept submissions for new or renewal registrations unless there are adequate supporting documents provided to show that the Controlled Goods are affixed with the updated SAFETY Mark.Supporting documents include photographs of the Controlled Good rating label and product sample.
2018-4-2之前已經取得證書并印有舊logo在市場銷售的產品有一年過渡期，制造商需要在2019-4-2之前將所有產品名牌中的PSB符號換為最新版本。
2、For Controlled Goods registered before 2 April 2018:
Registered Suppliers are not required to recall and replace the SAFETY Mark for Controlled Goods that are in the market today. For example, Controlled Goods that have already been affixed with the old SAFETY Mark and distributed to warehouses or retail outlets. For such Controlled Goods. There is a one-year grace period till 2 April 2019 for Registered Suppliers to comply with the updated requirements.
Registered Suppliers should ensure that new batches of these Controlled Goods bear the updated SAFETY Mark before they are distributed to the market.
其原官網也由https://www.spring.gov.sg/ 更新為 https://www.enterprisesg.gov.sg/
1. 底色由原來的藍色改為紅色（印刷時可以根據實際需求印刷成黑白）；
2. “SAFETY MARK” 字體微調（見下圖）
原來要求的顏色：
現在要求的顏色：
對于標志尺寸要求如下：
1）SAFETY Mark without Contrasting Background(e.g.embossed on body of Controlled Goods)
The safety logo ,letters and certification number shall be of raised or lowered depth of not less than 0.51mm.
The SAFETY Mark(consisting of both the safety logo and the word”SAFETY MARK”)shall have a height of not less than 9.5 mm.The certification number shall have a height of not less than 2.8 mm.
Any SAFETY Mark with dimension smaller than the above has to be approved by the Safety Authority.
2) SAFETY Mark with Contrasting Background（e.g.silk screened on body of Controlled Goods or printed on rating labels or carton boxes or as standalone adhesive labels）
The SAFETY Mark（consisting of both the safety logo and the word”SAFETY MARK”）Shall have a height of not less than 6.0 mm. The certification number shall have a height of not less than 1.6 mm.
Any SAFETY Mark with dimension smaller than the above has to be approved by the Safety Authority.
3)Points for adherence
a)The SAFETY Mark shall be fully reproduced with the safety logo enclosed in a square on the left, the word”SAFETY MARK”enclosed in a rectangle on the right and the certification number traceable to the registrant across the bottom.
b)The SAFETY Mark can be embossed or silk screened on any coloured material or printed with the same colour used for rating labels or carton box markings.When printed as standalone adhesive labels, the colour of the safety logo, the background for the word”SAFETY MARK”and the certification number is Pantone 032C.
同時，Enterprise Singapore于4月6日發布文件宣布從2018.4.1 開始實施新的PSB 標志。自2018-4-2 起，新發證的PSB證書對應產品上新加坡logo需使用最新標志。
B. Registration and Usage of Updated SAFETY Mark
The SAFETY Mark has been updated in view of the formation of Enterprise Singapore.Refer to Annex A of this circular for the new SAFETY Mark Bromide, and Annex B for the guidelines on usage of the SAFETY Mark on Registered Controlled Goods.
Registered Suppliers must note the following on utilization of the updated SAFETY Mark:
1、For any registration of Controlled Goods after 2 April 2018:
Registered Suppliers who submit new or renewal registrations of Controlled Goods after 2 April 2018 are to affix the Controlled Goods with the updated SAFETY Mark（refer to Annex A）,after it is successfully registered, and before being supplied in Singapore.
After 2 April 2019, Enterprise Singapore will not accept submissions for new or renewal registrations unless there are adequate supporting documents provided to show that the Controlled Goods are affixed with the updated SAFETY Mark.Supporting documents include photographs of the Controlled Good rating label and product sample.
2018-4-2之前已經取得證書并印有舊logo在市場銷售的產品有一年過渡期，制造商需要在2019-4-2之前將所有產品名牌中的PSB符號換為最新版本。
2、For Controlled Goods registered before 2 April 2018:
Registered Suppliers are not required to recall and replace the SAFETY Mark for Controlled Goods that are in the market today. For example, Controlled Goods that have already been affixed with the old SAFETY Mark and distributed to warehouses or retail outlets. For such Controlled Goods. There is a one-year grace period till 2 April 2019 for Registered Suppliers to comply with the updated requirements.
Registered Suppliers should ensure that new batches of these Controlled Goods bear the updated SAFETY Mark before they are distributed to the market.